1000 M3/H Screw Screen For Industrial Domestic Wastewater Treatment SLD16

SLD16 Screw Screen For Industrial Domestic Wastewater Treatment
 
High PerformanceThe screw screens are used to pre-treat any type of wastewater, whether
 
municipal or industrial.
 
The main advantages of these models of machines are mainly the low cost of initial
 
investment and the subsequent little maintenance required.The construction of the machine
 
can be made by choosing between the execution in Stainless Steel .
 
The screen basket is cleaned by reinforced and bolted brushes, easily replaceable once worn
 
out.
 
working principle
 
Screw screen to the horizontal equipment installed in the drains, the water from flowing into
 
the drum drum ends, the water flows through the grid gate slit, solid waste is filtered in the
 
grid baskets, cleaning arm with a finger in a circular motion when cleaning Grilling gap,
 
rake teeth extending into the grid, the solid was removed when the cleaning arm at the
 
highest point, by the action of water washing and slag plate, remove the garbage down from
 
the rake teeth, and fall into the garbage collection means a screw conveyor bucket, during
 
transport through the variable pitch action is dehydrated at the uppermost end of the
 
compression zone is squeezed, and squeezed the water is returned to the canal, and finally
 
into the garbage container or a successor device, and then processed.
 
Benefits
 
Throughput rates up to 1000 m³/h (589 cfm)
 
Screen mesh size ranging from 0.25 mm (0.01") to 10 mm (0.4")
 
Screen width ranging from 200 mm (8") to 700 mm (27½")
 
Stainless steel casing
 
Shaftless spiral screw in carbon steel or stainless steel
 
Intermittent operation
 
Variety of screen mesh sizes
 
Versatility: can be installed in a concrete channel on site or supplied with a self-supporting
 
container (supplied on request)
 
Volume reduction up to 50%
 
Absence of inside bearings
 
No mechanical components in contact with the product handled
 
Slow r.p.m.
 
Shaftless spiral, therefore no jamming or blocking even with fibrous products
 
Possibility of discharge into plastic bags
 
Long-life screw brushes
 
Low investment costs
 
Technical parameters