Product Details:
Payment & Shipping Terms:
|
Press Type: | Screw Type | Material: | SS304 Stainless Steel |
---|---|---|---|
Treating Capacity: | 6-10kg/h | Service Life: | >10 Years |
Type:: | Sludge Thickening | Processing:: | Water Treatment System |
High Light: | sludge thickening equipment,slurry dewatering equipment |
Dewatering Screw Press Dewatering Machine For Sewage Treatment Plant
The main part of the dehydrator is a filter device that a screw runs through the stacked fixed
rings and moving ring.
The small gaps between fixed rings and moving ring can filter the sludge, and the
lumenbetween screw and rings is filled with polymer grains. The moving ring transfers the
sludge to the end of the machine with pressure and extrudes sludge cakes.
The running of the screw drives the moving ring to clean the gaps and avoid jam.
Work process:
The thickened sludge moves forward continuously from the thickening zone towards the
dewatering zone. With the pitch of the screw shaft thread getting narrower and narrower, the
pressure in the filter chamber increases higher and higher. In addition to the pressure
generated by the back-pressure plate, the sludge is greatly pressed and dryer sludge cakes
produce.
Advantage
1) Without secondary pollution
The screw shaft rotational speed about 2-3r/min, no vibration and noise is very small ; The
laminated with self - cleaning function, plugging does not occur, only a small amount of water
washing, without secondary pollution, and sludge at such a slow running under the operating
condition, the smell does not spread, thereby creating a great work environment!
2) Contactless, Wear Free Structure Design
Volute sludge dewatering uses the contactless wear free structure between the disks and
screw shafts, thus the service life of the Screw shafts and the rings will be greatly extended.
The treatment capacity of equipment and processing effects can be improved in combination
with other optimization design.
3) Decrease Capital Investment
Volute sludge dewatering can treat sludge in aeration tank and secondary sedimentation tank
without setting sludge thickeners. Therefore, this can decrease the total investment, avoid
phosphorus release from the sludge thickeners and sludge storage tanks and enhance
phosphorus removal effect of the wastewater treatment system.
4) High Resistance to Oily Sludge
The self-cleaning mechanism and stainless steel structure enables MDS to be ideal to
dewater oily sludge, which easily causes clogging and is difficult to treat with other types of
dewatering equipment.
Technical parameters
Model | DS Standard capacity(kg/h) |
Sludge treatment(m3/h) |
||||||||
10000mg/L | 20000mg/L | 30000mg/L | 40000mg/L | 50000mg/L | ||||||
HLDS131 | 6-10 | 1 | 0.5 | 0.4 | 0.3 | 0.28 | ||||
HLDS132 | 12-20 | 2 | 1 | 0.8 | 0.6 | 0.56 | ||||
HLDS133 | 18-30 | 3 | 1.5 | 1.2 | 0.9 | 0.84 | ||||
HLDS201 | 9-15 | 1.5 | 0.75 | 0.6 | 0.5 | 0.4 | ||||
HLDS202 | 18-30 | 3 | 1.5 | 1.2 | 1 | 0.8 | ||||
HLDS203 | 27-45 | 4.5 | 2.25 | 1.8 | 1.5 | 1.2 | ||||
HLDS301 | 30-50 | 5 | 2.5 | 2 | 1.5 | 1.4 | ||||
HLDS302 | 60-100 | 10 | 5 | 4 | 3 | 2.8 | ||||
HLDS303 | 90-150 | 15 | 7.5 | 6 | 4.5 | 4.2 | ||||
HLDS304 | 120-200 | 20 | 10 | 8 | 6 | 5.6 | ||||
HLDS401 | 90-150 | 13 | 6.5 | 5 | 4 | 3.2 | ||||
HLDS402 | 180-300 | 26 | 13 | 10 | 8 | 6.4 | ||||
HLDS403 | 270-450 | 39 | 19.5 | 15 | 12 | 9.6 | ||||
HLDS404 | 360-600 | 52 | 26 | 20 | 16 | 12.8 |
Model | DN(mm) |
Discharge Height(mm) |
Dimension(mm) |
N.W(kg) |
O.W(kg) |
||
L | M | H | |||||
HLDS131 | φ130*1 | 250 | 1860 | 740 | 1075 | 250 | 395 |
HLDS132 | φ130*2 | 250 | 1960 | 870 | 1075 | 350 | 595 |
HLDS133 | φ130*3 | 250 | 1960 | 920 | 1075 | 450 | 795 |
HLDS201 | φ200*1 | 350 | 2650 | 750 | 1375 | 420 | 540 |
HLDS202 | φ200*2 | 350 | 2650 | 940 | 1375 | 550 | 660 |
HLDS203 | φ200*3 | 350 | 2650 | 1190 | 1375 | 700 | 1010 |
HLDS301 | φ300*1 | 530 | 3440 | 940 | 1825 | 900 | 1300 |
HLDS302 | φ300*2 | 530 | 3640 | 1260 | 1825 | 1350 | 2000 |
HLDS303 | φ300*3 | 530 | 3900 | 1620 | 1825 | 1900 | 2700 |
HLDS304 | φ300*4 | 530 | 3900 | 2040 | 1825 | 2500 | 3600 |
HLDS401 | φ350*1 | 570 | 4350 | 1020 | 2160 | 2200 | 4200 |
HLDS402 | φ350*2 | 570 | 4350 | 1550 | 2160 | 3500 | 6000 |
HLDS403 | φ350*3 | 570 | 4570 | 2100 | 2160 | 5500 | 8000 |
HLDS404 | φ350*4 | 570 | 4570 | 2650 | 2160 | 7000 | 9500 |
Model | Motor Power | Rinse Water Pressure | Water Consumption(L/H) |
Maintennance Frequency |
||
Screw shaft | agitator | total | ||||
HLDS131 | 0.1 | 0.1 | 0.2 |
0.1Mpa-0.2Mpa No need high pressure rinse water |
48 |
5min/day |
HLDS132 | 0.1*2 | 0.1 | 0.3 | 96 | ||
HLDS133 | 0.1*3 | 0.1 | 0.4 | 144 | ||
HLDS201 | 0.37 | 0.37 | 0.74 | 32 | ||
HLDS202 | 0.37 | 0.37 | 1.11 | 64 | ||
HLDS203 | 0.37 | 0.37 | 1.48 | 96 | ||
HLDS301 | 0.75*1 | 0.75 | 1.5 | 40 | ||
HLDS302 | 0.75*2 | 0.75 | 2.25 | 80 | ||
HLDS303 | 0.75*3 | 0.75 | 3 | 120 | ||
HLDS304 | 0.75*4 | 0.75 | 3.75 | 160 | ||
HLDS401 | 1.1*1 | 0.75 | 1.85 | 80 | ||
HLDS402 | 1.1*2 | 0.75 | 2.95 | 160 | ||
HLDS403 | 1.1*3 | 0.75 | 4.05 | 240 | ||
HLDS404 | 1.1*4 | 0.75 | 5.15 | 320 |
Contact Person: Lisa
Tel: +8615995395879