Product Details:
Payment & Shipping Terms:
|
Press Type: | Screw Type | Material: | SS304 Stainless Steel |
---|---|---|---|
Operation:: | Automatic, PLC Control | Service Life: >15years: | >10 |
Operate:: | Automatic | Capacity:: | 3Kg.Ds/h--180Kg.Ds/h |
High Light: | sludge thickening equipment,slurry dewatering equipment |
Screw Dewatering Press Oily Sludge Treatment Machine For Waste Water Treatment
Sludge dewatering machine that is folding of sludge dewatering machine, is a kind of widely
used in municipal sewage treatment project and petrochemicals, light industry, chemical fiber,
paper making, pharmacy, industry of water treatment systems, such as leather. The actual
operation proves that the sludge dewatering can create
considerable economic and social benefits for customers.
1. The main body of a dehydrator consists of a fixed ring and a moving ring, and the spiral
shaft is formed through the filtering device. The front part is the concentration section, and the
latter part is the dehydration part.
2. The filter joints formed between the fixed ring and the moving ring and the helical pitch of
the helical axis are gradually reduced from the concentration to the dewatering part.
3. The rotation of the screw axis pushes the sludge from the concentrated part to the
dewatering part, while also continuously driving the swimming ring to clean the filtration joint to
prevent the blockage.
Advantage
Iso9001 Certificated Sludge Dewatering Machine
1. Widely Use
Municipal wastewater, papermaking wastewater, chemical waste water, food and beverage
processing
waste water, industrial wastewater, papermaking wastewater, pharmaceutical wastewater, oil
processing
and mining wastewater, etc.
2. Fully Automatic Control
Combining with the auto control system, the machine runs very safely and simply and can be
programmed
according to the requirement of the users. It can operate automatically for 24 hours,
unmanned.
3. Low Running Cost
Main body can self-cleaning due to the special structure, threr is no need to use a lot of water
for cleaning
to prevent clogging. Compared with the same capacity of dewatering machine, screw rinse
water
consumption is only 1% of belt . The rotation speed of screw shaft is 2-5 turn/min , low power
consumption. Power consumption is only 5% of the centrifuge, at the same time, no noise
during operation as slow rotation speed and intermittent flush.
4. Non-clogging
The dewatering body is formed by a screw axis with fixing and moving plates overlapping, as
the inner
diameter of screw axis is larger than the moving plate, the moving plate do the circular motion
with the
screw axis to prevent clogging, to ensure the continuous operation.
Technical parameters
Model | DS Standard capacity(kg/h) |
Sludge treatment(m3/h) |
||||||||
10000mg/L | 20000mg/L | 30000mg/L | 40000mg/L | 50000mg/L | ||||||
HLDS131 | 6-10 | 1 | 0.5 | 0.4 | 0.3 | 0.28 | ||||
HLDS132 | 12-20 | 2 | 1 | 0.8 | 0.6 | 0.56 | ||||
HLDS133 | 18-30 | 3 | 1.5 | 1.2 | 0.9 | 0.84 | ||||
HLDS201 | 9-15 | 1.5 | 0.75 | 0.6 | 0.5 | 0.4 | ||||
HLDS202 | 18-30 | 3 | 1.5 | 1.2 | 1 | 0.8 | ||||
HLDS203 | 27-45 | 4.5 | 2.25 | 1.8 | 1.5 | 1.2 | ||||
HLDS301 | 30-50 | 5 | 2.5 | 2 | 1.5 | 1.4 | ||||
HLDS302 | 60-100 | 10 | 5 | 4 | 3 | 2.8 | ||||
HLDS303 | 90-150 | 15 | 7.5 | 6 | 4.5 | 4.2 | ||||
HLDS304 | 120-200 | 20 | 10 | 8 | 6 | 5.6 | ||||
HLDS401 | 90-150 | 13 | 6.5 | 5 | 4 | 3.2 | ||||
HLDS402 | 180-300 | 26 | 13 | 10 | 8 | 6.4 | ||||
HLDS403 | 270-450 | 39 | 19.5 | 15 | 12 | 9.6 | ||||
HLDS404 | 360-600 | 52 | 26 | 20 | 16 | 12.8 |
Model | DN(mm) |
Discharge Height(mm) |
Dimension(mm) |
N.W(kg) |
O.W(kg) |
||
L | M | H | |||||
HLDS131 | φ130*1 | 250 | 1860 | 740 | 1075 | 250 | 395 |
HLDS132 | φ130*2 | 250 | 1960 | 870 | 1075 | 350 | 595 |
HLDS133 | φ130*3 | 250 | 1960 | 920 | 1075 | 450 | 795 |
HLDS201 | φ200*1 | 350 | 2650 | 750 | 1375 | 420 | 540 |
HLDS202 | φ200*2 | 350 | 2650 | 940 | 1375 | 550 | 660 |
HLDS203 | φ200*3 | 350 | 2650 | 1190 | 1375 | 700 | 1010 |
HLDS301 | φ300*1 | 530 | 3440 | 940 | 1825 | 900 | 1300 |
HLDS302 | φ300*2 | 530 | 3640 | 1260 | 1825 | 1350 | 2000 |
HLDS303 | φ300*3 | 530 | 3900 | 1620 | 1825 | 1900 | 2700 |
HLDS304 | φ300*4 | 530 | 3900 | 2040 | 1825 | 2500 | 3600 |
HLDS401 | φ350*1 | 570 | 4350 | 1020 | 2160 | 2200 | 4200 |
HLDS402 | φ350*2 | 570 | 4350 | 1550 | 2160 | 3500 | 6000 |
HLDS403 | φ350*3 | 570 | 4570 | 2100 | 2160 | 5500 | 8000 |
HLDS404 | φ350*4 | 570 | 4570 | 2650 | 2160 | 7000 | 9500 |
Model | Motor Power | Rinse Water Pressure | Water Consumption(L/H) |
Maintennance Frequency |
||
Screw shaft | agitator | total | ||||
HLDS131 | 0.1 | 0.1 | 0.2 |
0.1Mpa-0.2Mpa No need high pressure rinse water |
48 |
5min/day |
HLDS132 | 0.1*2 | 0.1 | 0.3 | 96 | ||
HLDS133 | 0.1*3 | 0.1 | 0.4 | 144 | ||
HLDS201 | 0.37 | 0.37 | 0.74 | 32 | ||
HLDS202 | 0.37 | 0.37 | 1.11 | 64 | ||
HLDS203 | 0.37 | 0.37 | 1.48 | 96 | ||
HLDS301 | 0.75*1 | 0.75 | 1.5 | 40 | ||
HLDS302 | 0.75*2 | 0.75 | 2.25 | 80 | ||
HLDS303 | 0.75*3 | 0.75 | 3 | 120 | ||
HLDS304 | 0.75*4 | 0.75 | 3.75 | 160 | ||
HLDS401 | 1.1*1 | 0.75 | 1.85 | 80 | ||
HLDS402 | 1.1*2 | 0.75 | 2.95 | 160 | ||
HLDS403 | 1.1*3 | 0.75 | 4.05 | 240 | ||
HLDS404 | 1.1*4 | 0.75 | 5.15 | 320 |
Contact Person: Lisa