Product Details:
Payment & Shipping Terms:
|
Press Type: | Screw Type | Material: | SS304 Stainless Steel |
---|---|---|---|
Operation:: | Automatic, PLC Control | Service Life: >15years: | >10 |
Artwork:: | Ant-corrosin&abration Resistant | Size:: | 3900*1620*1825mm |
High Light: | sludge thickening equipment,slurry dewatering equipment |
Volute Screw Press Sludge Dewatering Machine For Wastewater Treatment
Introduction
Volute Sludge Dewatering Machine is a new solid - liquid separation equipment. It uses the
screw extrusion principle, strong extrusion pressure generated by the screw diameter and
pitch change, and tiny gap between the moving ring and the fixing ring to achieve the sludge
extrusion dehydration.
Sludge goes from the feed inlet into the metering tank , moved to the flocculation mixing tank,
then moved to the dewatering tank, by the push of the spiral shaft rotary vane, the pitch is
gradually reduced, water outflow from fixed rings and moving rings, sludge cake is discharged
from the discharge port.
It is widely used in city mixed raw sewage, food & beverage industry, chemical industry, stone
& mine-sewage, tannery sewage, paper & pulp sewage, plating sewage, print & dyeing
sewage, power plant, chemical industry and so on.
Product Features
1. Full automatic, easy to operate, save labor.
2. Heavy-duty industrial quality suited for continuous 24 hr./day.
3. Large treat capacity with low dewatered sludge moisture.
4. Material stainless steel, with longer service life, excellent anti-corrosion performance.
5. Compact in structure, contains a built-in flocculation tank, small footprint.
6. Self-cleaning, moving rings will clean screw press continuously during working.
7. Especially suits for wastewater which contains oils.
8. Low rotating speed, low electric consumption.
9. Small vibration and low noise.
10. Less spare parts(only the screw and moving rings), easy to maintain.
Technical parameters
Model | DS Standard capacity(kg/h) |
Sludge treatment(m3/h) |
||||||||
10000mg/L | 20000mg/L | 30000mg/L | 40000mg/L | 50000mg/L | ||||||
HLDS131 | 6-10 | 1 | 0.5 | 0.4 | 0.3 | 0.28 | ||||
HLDS132 | 12-20 | 2 | 1 | 0.8 | 0.6 | 0.56 | ||||
HLDS133 | 18-30 | 3 | 1.5 | 1.2 | 0.9 | 0.84 | ||||
HLDS201 | 9-15 | 1.5 | 0.75 | 0.6 | 0.5 | 0.4 | ||||
HLDS202 | 18-30 | 3 | 1.5 | 1.2 | 1 | 0.8 | ||||
HLDS203 | 27-45 | 4.5 | 2.25 | 1.8 | 1.5 | 1.2 | ||||
HLDS301 | 30-50 | 5 | 2.5 | 2 | 1.5 | 1.4 | ||||
HLDS302 | 60-100 | 10 | 5 | 4 | 3 | 2.8 | ||||
HLDS303 | 90-150 | 15 | 7.5 | 6 | 4.5 | 4.2 | ||||
HLDS304 | 120-200 | 20 | 10 | 8 | 6 | 5.6 | ||||
HLDS401 | 90-150 | 13 | 6.5 | 5 | 4 | 3.2 | ||||
HLDS402 | 180-300 | 26 | 13 | 10 | 8 | 6.4 | ||||
HLDS403 | 270-450 | 39 | 19.5 | 15 | 12 | 9.6 | ||||
HLDS404 | 360-600 | 52 | 26 | 20 | 16 | 12.8 |
Model | DN(mm) |
Discharge Height(mm) |
Dimension(mm) |
N.W(kg) |
O.W(kg) |
||
L | M | H | |||||
HLDS131 | φ130*1 | 250 | 1860 | 740 | 1075 | 250 | 395 |
HLDS132 | φ130*2 | 250 | 1960 | 870 | 1075 | 350 | 595 |
HLDS133 | φ130*3 | 250 | 1960 | 920 | 1075 | 450 | 795 |
HLDS201 | φ200*1 | 350 | 2650 | 750 | 1375 | 420 | 540 |
HLDS202 | φ200*2 | 350 | 2650 | 940 | 1375 | 550 | 660 |
HLDS203 | φ200*3 | 350 | 2650 | 1190 | 1375 | 700 | 1010 |
HLDS301 | φ300*1 | 530 | 3440 | 940 | 1825 | 900 | 1300 |
HLDS302 | φ300*2 | 530 | 3640 | 1260 | 1825 | 1350 | 2000 |
HLDS303 | φ300*3 | 530 | 3900 | 1620 | 1825 | 1900 | 2700 |
HLDS304 | φ300*4 | 530 | 3900 | 2040 | 1825 | 2500 | 3600 |
HLDS401 | φ350*1 | 570 | 4350 | 1020 | 2160 | 2200 | 4200 |
HLDS402 | φ350*2 | 570 | 4350 | 1550 | 2160 | 3500 | 6000 |
HLDS403 | φ350*3 | 570 | 4570 | 2100 | 2160 | 5500 | 8000 |
HLDS404 | φ350*4 | 570 | 4570 | 2650 | 2160 | 7000 | 9500 |
Model | Motor Power | Rinse Water Pressure | Water Consumption(L/H) |
Maintennance Frequency |
||
Screw shaft | agitator | total | ||||
HLDS131 | 0.1 | 0.1 | 0.2 |
0.1Mpa-0.2Mpa No need high pressure rinse water |
48 |
5min/day |
HLDS132 | 0.1*2 | 0.1 | 0.3 | 96 | ||
HLDS133 | 0.1*3 | 0.1 | 0.4 | 144 | ||
HLDS201 | 0.37 | 0.37 | 0.74 | 32 | ||
HLDS202 | 0.37 | 0.37 | 1.11 | 64 | ||
HLDS203 | 0.37 | 0.37 | 1.48 | 96 | ||
HLDS301 | 0.75*1 | 0.75 | 1.5 | 40 | ||
HLDS302 | 0.75*2 | 0.75 | 2.25 | 80 | ||
HLDS303 | 0.75*3 | 0.75 | 3 | 120 | ||
HLDS304 | 0.75*4 | 0.75 | 3.75 | 160 | ||
HLDS401 | 1.1*1 | 0.75 | 1.85 | 80 | ||
HLDS402 | 1.1*2 | 0.75 | 2.95 | 160 | ||
HLDS403 | 1.1*3 | 0.75 | 4.05 | 240 | ||
HLDS404 | 1.1*4 | 0.75 | 5.15 | 320 |
Contact Person: Lisa