Product Details:
Payment & Shipping Terms:
|
Press Type: | Screw Type | Material: | SS304 Stainless Steel |
---|---|---|---|
Treating Capacity: | 6-10kg/h | Service Life: | >10 Years |
Electrical Component: | Schneider/Omron/Customize | Motor: | SEW/NORD/Customize |
High Light: | sludge removal machine,slurry dewatering equipment |
Self - Cleaning Screw Sludge Dewatering Dehydrator In ETP Plant
Different kinds of sludge will be produced duming waer processing. The sludge dehydrating
devices are mainly used to decrease water content, reduce sludge volume, and easy the
processing of the next sludge treating step. The sludge dewatering machines can be usually
including the ollowing types: belt filer press, centifugal dewatering machine, plate and ramme
lilter press and screw type sludge dehydrator.
Recently, the belt fiter press is widely used in the sludge dehydrating, however, some
problems are being with this machine, such as the large quantities of water consumption,
operation requirement is high etc. But,the screw type sludge dehydrator is a new type sludge
dehydrator. With its advantages, such as energy saving, operaton stable, highly automation it
is quickly recognized and accepted by the market.
Advantage
Iso9001 Certificated Sludge Dewatering Machine
1. Widely Use
Municipal wastewater, papermaking wastewater, chemical waste water, food and beverage processing
waste water, industrial wastewater, papermaking wastewater, pharmaceutical wastewater, oil processing
and mining wastewater, etc.
2. Fully Automatic Control
Combining with the auto control system, the machine runs very safely and simply and can be programmed
according to the requirement of the users. It can operate automatically for 24 hours, unmanned.
3. Low Running Cost
Main body can self-cleaning due to the special structure, threr is no need to use a lot of water for cleaning
to prevent clogging. Compared with the same capacity of dewatering machine, screw rinse water
consumption is only 1% of belt . The rotation speed of screw shaft is 2-5 turn/min , low power
consumption. Power consumption is only 5% of the centrifuge, at the same time, no noise during
operation as slow rotation speed and intermittent flush.
4. Non-clogging
The dewatering body is formed by a screw axis with fixing and moving plates overlapping, as the inner
diameter of screw axis is larger than the moving plate, the moving plate do the circular motion with the
screw axis to prevent clogging, to ensure the continuous operation.
Technical parameters
Model | DS Standard capacity(kg/h) |
Sludge treatment(m3/h) |
||||||||
10000mg/L | 20000mg/L | 30000mg/L | 40000mg/L | 50000mg/L | ||||||
HLDS131 | 6-10 | 1 | 0.5 | 0.4 | 0.3 | 0.28 | ||||
HLDS132 | 12-20 | 2 | 1 | 0.8 | 0.6 | 0.56 | ||||
HLDS133 | 18-30 | 3 | 1.5 | 1.2 | 0.9 | 0.84 | ||||
HLDS201 | 9-15 | 1.5 | 0.75 | 0.6 | 0.5 | 0.4 | ||||
HLDS202 | 18-30 | 3 | 1.5 | 1.2 | 1 | 0.8 | ||||
HLDS203 | 27-45 | 4.5 | 2.25 | 1.8 | 1.5 | 1.2 | ||||
HLDS301 | 30-50 | 5 | 2.5 | 2 | 1.5 | 1.4 | ||||
HLDS302 | 60-100 | 10 | 5 | 4 | 3 | 2.8 | ||||
HLDS303 | 90-150 | 15 | 7.5 | 6 | 4.5 | 4.2 | ||||
HLDS304 | 120-200 | 20 | 10 | 8 | 6 | 5.6 | ||||
HLDS401 | 90-150 | 13 | 6.5 | 5 | 4 | 3.2 | ||||
HLDS402 | 180-300 | 26 | 13 | 10 | 8 | 6.4 | ||||
HLDS403 | 270-450 | 39 | 19.5 | 15 | 12 | 9.6 | ||||
HLDS404 | 360-600 | 52 | 26 | 20 | 16 | 12.8 |
Model | DN(mm) |
Discharge Height(mm) |
Dimension(mm) |
N.W(kg) |
O.W(kg) |
||
L | M | H | |||||
HLDS131 | φ130*1 | 250 | 1860 | 740 | 1075 | 250 | 395 |
HLDS132 | φ130*2 | 250 | 1960 | 870 | 1075 | 350 | 595 |
HLDS133 | φ130*3 | 250 | 1960 | 920 | 1075 | 450 | 795 |
HLDS201 | φ200*1 | 350 | 2650 | 750 | 1375 | 420 | 540 |
HLDS202 | φ200*2 | 350 | 2650 | 940 | 1375 | 550 | 660 |
HLDS203 | φ200*3 | 350 | 2650 | 1190 | 1375 | 700 | 1010 |
HLDS301 | φ300*1 | 530 | 3440 | 940 | 1825 | 900 | 1300 |
HLDS302 | φ300*2 | 530 | 3640 | 1260 | 1825 | 1350 | 2000 |
HLDS303 | φ300*3 | 530 | 3900 | 1620 | 1825 | 1900 | 2700 |
HLDS304 | φ300*4 | 530 | 3900 | 2040 | 1825 | 2500 | 3600 |
HLDS401 | φ350*1 | 570 | 4350 | 1020 | 2160 | 2200 | 4200 |
HLDS402 | φ350*2 | 570 | 4350 | 1550 | 2160 | 3500 | 6000 |
HLDS403 | φ350*3 | 570 | 4570 | 2100 | 2160 | 5500 | 8000 |
HLDS404 | φ350*4 | 570 | 4570 | 2650 | 2160 | 7000 | 9500 |
Model | Motor Power | Rinse Water Pressure | Water Consumption(L/H) |
Maintennance Frequency |
||
Screw shaft | agitator | total | ||||
HLDS131 | 0.1 | 0.1 | 0.2 |
0.1Mpa-0.2Mpa No need high pressure rinse water |
48 |
5min/day |
HLDS132 | 0.1*2 | 0.1 | 0.3 | 96 | ||
HLDS133 | 0.1*3 | 0.1 | 0.4 | 144 | ||
HLDS201 | 0.37 | 0.37 | 0.74 | 32 | ||
HLDS202 | 0.37 | 0.37 | 1.11 | 64 | ||
HLDS203 | 0.37 | 0.37 | 1.48 | 96 | ||
HLDS301 | 0.75*1 | 0.75 | 1.5 | 40 | ||
HLDS302 | 0.75*2 | 0.75 | 2.25 | 80 | ||
HLDS303 | 0.75*3 | 0.75 | 3 | 120 | ||
HLDS304 | 0.75*4 | 0.75 | 3.75 | 160 | ||
HLDS401 | 1.1*1 | 0.75 | 1.85 | 80 | ||
HLDS402 | 1.1*2 | 0.75 | 2.95 | 160 | ||
HLDS403 | 1.1*3 | 0.75 | 4.05 | 240 | ||
HLDS404 | 1.1*4 | 0.75 | 5.15 | 320 |
Contact Person: Lisa